Q-Logic 2-8C manual Show Config Command, Show config

B – Command Line Interface	0
Show Config Command

Show Config Command

Displays switch, port, alarm threshold, and zoning for the current configuration.

Authority	None
Syntax	show config
	port [port_number]
	switch
	threshold
	zoning
Keywords	port [port_number]
	Displays configuration parameters for the port number given by [port_number].
	Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
	specified.
	switch
	Displays configuration parameters for the switch.
	threshold
	Displays alarm threshold parameters for the switch.
	zoning
	Displays zoning configuration parameters for the switch.
Examples The following is an example of the Show Config Port command:
	SANbox2 #> show config port 3
	Port Number: 3
	------------
	AdminState	Offline
	LinkSpeed	Auto
	PortType	GL
	SymbolicName	Port3
	ALFairness	False
	DeviceScanEnabled	True
	ForceOfflineRSCN	False
	ARB_FF	False
	InteropCredit	0
	ExtCredit	0
	FANEnabled	True
	AutoPerfTuning	False
	LCFEnabled	False
	MFSEnabled	True
	MSEnabled	True
	NoClose	False
	IOStreamGuard	Disabled
	VIEnabled	False
	PDISCPingEnable	True

B-70 59042-06 A