Digi 90000566_H manual Set putty, Displays current terminal-emulation settings, For it to process

	set putty
set putty
Devices	This command is supported in ConnectPort Display devices only.
supported
Purpose	Configures terminal-emulation settings for ConnectPort Display, and
	displays current terminal-emulation settings.
	ConnectPort Display can emulate a terminal connected to a host/server
	over a serial line or the network. When connected over the network
	RealPort must be installed on the server. RealPort ports appear to
	applications on the server as serial ports, but the data is redirected over the
	network to the terminal. For more information on RealPort, see the
	RealPort Installation Guide.
	A ConnectPort Display device can emulate a terminal connected to a host/
	server. Data sent from the host application is processed and displayed on
	the terminal screen. A keyboard can also be used. If a keyboard is
	connected to the terminal, the terminal data is sent to the host application
	for it to process.
	A reboot is required for the terminal-emulation settings to take effect.
Syntax	Set general terminal emulator options
	set putty [state={onoff}]
	[width={80132}]
	[height=10-60]
	[hostport={/com/0/com/1/vcom/0]
	[keyboardport={/com/0/com/1}]
	[cursortype={noneblockunderlinevertical}]
	[blinkcursor={onoff}]
	[blinktext={onoff}]
	[backspaceisdelete={onoff}]
	[lfimpliescr={onoff}]
	[characterset=host charset]
	Set key mappings - range required
	set putty
	[deletekeymaprange=1-32]
	[keymaprange=1-32]
	[inseq=00-FF]
	[outseq=00-FF]
	Display terminal emulation settings
	set putty

Chapter 2 Command Descriptions 175