Digi 90000566_H manual Set switches set switches, Used, Configure MEI settings

set switches set switches

Device support	This command is supported in ConnectPort TS MEI products only.
Purpose	Configures Multiple Electrical Interface (MEI) settings on a per-port basis,
	and displays current MEI settings. MEI settings include the type of
	electrical interface (EIA-232 or EIA-485), the number of differential wires
	used for communication, and whether termination and biasing resistors are
	used.
Required	The serial permissions associated with the "set serial" command also apply
permissions	to this command. For Digi Connect products with two or more users, to use
	this command, permissions must be set to one of the following.
	• For a user to display the serial settings for the line on which they are
	logged in: “set permissions s-serial=r-self”
	• For a user to display the serial settings for any line:
	“set permissions s-serial=read”
	• For a user to display and set the serial settings for the line on which
	they are logged in: “set permissions s-serial=rw-self”
	• For a user to display the serial settings for any line, and set serial
	settings for the line on which the user is logged in:
	“set permissions s-serial=w-self-r”
	• For a user to display and set the serial settings on any line:
	“set permissions s-serial=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Configure MEI settings
	set switches [port=range]
	[mode={232485}]
	[wires={twofour}]
	[termination={onoff}]
	Display current MEI settings
	set switches

208 Chapter 2 Command Descriptions