Digi 90000566_H manual Kill, Range, Connection id

	kill
kill
Devices	This command is supported in all Digi Connect products.
supported
Purpose	Use the kill command to kill connections. The kill command is associated
	with the connections displayed by the “who” command.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions kill=execute” to use this command. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	kill [range] [connection id]
Options	range
	A range of connection IDs.
	connection id
	An ID for the connection.
Examples	Killing a session on a specific port
	#> kill 1
	Killing a session on a range of ports
	#> kill 1-3
See also	• "close" on page 21, to close sessions created from the current
	connection.
	• "status" on page 254, to display the list of current sessions.
	• "who" on page 258, for information on determining active connections.

Chapter 2 Command Descriptions 49