Digi 90000566_H State=onoff, Trigger=alwaysdatadcddsrstring, Always, Data, Dcd, Dsr, String, Raw

set autoconnect
Options	port=range
	Used to specify the serial port. Optional on a single-port device.
	state={onoff}
	Enables or disables the autoconnect feature.
	on
	Enables the autoconnect feature.
	off
	Disables the autoconnect feature.
	The default is off.
	If you are using the serial port for another purpose, it is recommended
	this value be set to “off.”
	trigger={alwaysdatadcddsrstring}
	Indicates which events from the serial port will trigger a network
	connection to occur.
	always
	The serial port will continually attempt to keep a connection to a
	remote network destination active.
	data
	The serial port will attempt a network connection whenever data
	arrives on the serial port.
	dcd
	The serial port will attempt a network connection whenever the serial
	port’s DCD signal goes high.
	dsr
	The serial port will attempt a network connection whenever the serial
	port’s DSR signal goes high.
	string
	A connection will be made upon detecting a particular sting, specified
	by the “connect_on_string” option, in the data from the serial port.
	The default is “always.”
	service={rawrloginssltelnet}
	The type of network connection that will be established.
	raw
	A connection without any special processing will occur.
	rlogin
	A remote login (rlogin) connection will occur.
	ssl
	A secure connection conforming to SSL (Secure Sockets Layer) Version
	3 and Transport Layer Security (TLS) Version 1 will occur.
	telnet
	A connection with Telnet processing will occur.
	The default is “raw.”

82 Chapter 2 Command Descriptions