Digi 90000566_H Set ekahau set ekahau, Digi Connect Wi-EM only, Wireless device, Ekahau=read

set ekahau set ekahau

Devices	This command is supported in Digi Connect Wi-SP, Digi Connect Wi-ME,
supported	and Digi Connect Wi-EM only.
Purpose	Configures Ekahau Client™ device-location software in a Digi Connect
	wireless device.
	The Ekahau Client feature provides integrated support for Ekahau's Wi-Fi
	device-location solution on the Digi Connect Wi-ME, Digi Connect Wi-EM,
	and Digi Connect Wi-SP products. Ekahau offers a complete access point
	vendor-independent real-time location system for wireless LAN devices
	that is capable of pinpointing wireless LAN devices such as the Digi
	Connect products, laptops, PDAs, or other intelligent Wi-Fi enabled
	devices. The solution provides floor-, room- and door-level accuracy of up
	to 3.5 feet (1 m). The patented Ekahau positioning technology is based on
	simple signal-strength calibration maps, and enables customers to fully
	leverage an existing wireless LAN infrastructure without any need for
	proprietary hardware components.
	Please visit www.ekahau.com for additional information, including free
	evaluation licenses for the Ekahau Positioning Engine and Ekahau Site
	Survey software products.
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display Ekahau client settings: “set permissions
	s-ekahau=read”
	• For a user to display and set Ekahau client settings: “set permissions
	s-ekahau=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Configure Ekahau settings
	set ekahau [state={onoff}]
	[id=device id]
	[poll_rate=seconds]
	[protocol={tcpudp}]
	[port=port]
	[server={hostnameip address}]
	[password=string]
	[name=string]
	Display current Ekahau settings
	set ekahau

104 Chapter 2 Command Descriptions