Digi 90000566_H manual Publickey=tftphostfilenameclear, Tftphostfilename

set user

public_key={tftphost:filenameclear}

Loads or clears an SSH public key used for authentication of this user. The key must be an RSA public key, in either OpenSSH or the IETF draft format.

tftphost:filename

Loads an SSH2 public key for use with this user, where:

tftphost

The IP address or DNS name of a host from which the SSH public key will be downloaded to the Digi Connect device using TFTP.

filename

	The name of a file on the host that contains the SSH public key. If
	your host’s implementation requires a complete path to this file,
	specify the path here as well.
	clear
	Unloads an SSH public key.
Examples	Add a new user
	#> set user add newname=jsmith id=4
	Remove user 7
	#> set user remove id=7
	Associate user “johndoe” with the root group
	#> set user associate name=johndoe gname=root
	Disassociate user 15 from group 2
	#> set user disassociate id=15 gid=2
	Set a new user name to be entered at login
	#> set user id=4 newname=jdoe
	Set a user to have default command line interface access
	#> set user id=4 commandline=on defaultaccess=commandline
	Set a user to use group access rights
	#> set user name=johndoe groupaccess=on defaultaccess=group defaultgroup=root
See also	• "User Models and User Permissions in Digi Connect Products" on page
	14.
	• "newpass" on page 51.
	• "revert" on page 61
	• "set group" on page 115.
	• "set menu" on page 132.
	• "set permissions" on page 157.
	• "show" on page 249.

224 Chapter 2 Command Descriptions