Digi 90000566_H manual Set mgmtconnection

set mgmtconnection

set mgmtconnection

Devices	This command is supported in all products except Digi Connect ES and
supported	ConnectPort Display.
Purpose	Configures or displays Connectware Manager server connection settings.
	The Connectware Manager server allows devices to be configured and
	managed from remote locations. These connection settings set up the
	connection to the Connectware Manager server so the Digi device knows
	how to connect to the server.
Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the Connectware Device Protocol connection
	settings: “set permissions s-mgmtconnection=read”
	• For a user to display and set Connectware Device Protocol connection
	settings: “set permissions s-mgmtconnection=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Configure Connectware Manager server connection settings
	set mgmtconnection [svraddr[1-8]=string]
	[conntype={clienttimedserverinitiated}]
	[connenabled={onoff}]
	[timedperiod=period]
	[timedoffset={immediateoneperiodrandomtime}]
	[lkaupdateenabled={onoff}]
	[clntreconntimeout={nonetimeout]
	Display Connectware Manager server connection settings
	set mgmtconnection
Options	svraddr[1-8]=string
	Used to specify one of eight possible Connectware Manager server
	addresses. When the device server attempts to connect to a
	Connectware Manager, it tries the server addresses in this list in the
	order 1-8.
	conntype={clienttimedserverinitiated}
	Used to specify the connection type.
	client
	This is a client connection.
	timed
	This is a timed connection.
	serverinitiated
	This is a server-initiated connection.
	connenabled={onoff}
	Used to specify whether or not this instance is enabled for use.

Chapter 2 Command Descriptions 137