Digi 90000566_H manual Data will not be buffered and all data will be cleared from, Buffer, Pause

set buffer

state

The buffering state, which can be any of the following:

on

The data will be buffered.

	off
	The data will not be buffered and all data will be cleared from the
	buffer.
	pause
	The data will not be buffered, but data in the buffer will not be cleared.
Examples	Display port buffer configuration for all ports
	#> set buffer
	Configure buffers
	In this example, the set buffer command sets the buffer state for port 1 to
	on mode and the buffer size to 64 kilobytes.
	#> set buffer port=1 state=on size=64
See also	• "revert" on page 61.
	• "show" on page 249.

Chapter 2 Command Descriptions 91