Digi 90000566_H manual Device support, Options Name=name

set host set host

Device support	This command is supported in all products.
Purpose	Configures a name for the device, also known as a host name, or displays
	the current host name for the device.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-host=read” to display the current host name, and
	“set permissions s-host=rw” to display and set the host name. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	Configure a host name for the device
	set host name=name
	Display the current host name
	set host
Options	name=name
	The name for the device. The name can be up to 32 characters long, and
	can contain any alphanumeric characters, and can also include the
	underscore ( _ ) and hyphen ( -) characters.
See also	• "show" on page 249.

118 Chapter 2 Command Descriptions