Digi 90000566_H manual Options Esc, User=user name -luser name

rlogin rlogin

Devices	This command is supported in Digi Connect Family and Digi Cellular
supported	Family products only. Not supported in ConnectPort Display.
Purpose	Performs a login to a remote system, also referred to as an rlogin.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions rlogin=execute” to use this command. See
	"set permissions" on page 157 for details on setting user permissions for
	commands.
Syntax	rlogin [esc=(char)] [{user=user name-l user name}]
	[ip address]
Options	esc
	A different escape character than the ~ (tilde) character, which will be
	used for the current Rlogin session. This character is used for
	suspending a session from the remote host to return to the device server
	command line.
	user=user name -luser name
	The user name to use on the remote system. If you do not specify a
	name, your device server user name will be used. The “-l user-name”
	option is for compatibility with the UNIX “rlogin” command.
	ip address
	The IP address of the system to which you are performing the remote
	login.
Examples	#> rlogin 10.0.0.1
See also	• "telnet" on page 255.
	• "connect" on page 22.
	• "status" on page 254.
	• "close" on page 21.

66 Chapter 2 Command Descriptions