Digi 90000566_H manual Set ethernet, Options Duplex, Half, Full, Auto

set ethernet

set ethernet

Devices	This command is supported in the following products:
supported	• Connect Family: Digi Connect SP, Digi Connect EM, Connect ME.
	• Digi Cellular Family: All Connect WAN products, but not
	ConnectPort WAN VPN.
	• ConnectPort Display.
Purpose	Configures, adjusts, and displays Ethernet communications options.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-ethernet=read” to display Ethernet communications
	options, and “set permissions s-ethernet=rw” to display and configure
	Ethernet communications options. See "set permissions" on page 157 for
	details on setting user permissions for commands.
Syntax	Configure Ethernet communications options
	set ethernet [duplex={halffullauto}] [speed={10100auto}]
	Display Ethernet communications options
	set ethernet
Options	duplex
	Determines the mode the Digi device uses to communicate on the
	Ethernet network. Specify one of the following:
	half
	The device communicates in half-duplex mode.
	full
	The device communicates in full-duplex mode.
	auto
	The device senses the mode used on the network and adjusts
	automatically.
	The default is “half.” If one side of the Ethernet connection is using auto,
	the other side can set the duplex value to whatever is desired. If one
	side uses a fixed value (for example, half-duplex), the other side has to
	use the same.

Chapter 2 Command Descriptions 107