Digi 90000566_H manual Command Descriptions 253

show

Display wireless settings

In addition to showing the current wireless settings, "show wlan" displays evaluation notes and warning messages about the effect and interaction of wireless settings. As the example shows, warning messages note encryption methods that have been defined but not used by any authentication methods, and notes identify whether configuration of certain features appears to be complete.

#> show wlan

Wireless LAN Configuration:

			Active settings
			(Stored settings)
			--------------------
	country	:	United States
	protocol mode	:	any
	channel	:	scan
	ssid	:
	maxtxrate(Mbps) :		11
	authentication	:	open
	encryption	:	open,wep,tkip,ccmp
	eap outer	:	peap,tls,ttls
	eap inner	:	gtc,md5,mschapv2,otp,chap,mschap,ttls_mschapv2,pap
	options	:
	txpower(dBm)	:	14dbm
	wepmode	:	64bit
	wepindex	:	1
	username	:
	Evaluation of your saved wireless settings:
	Warning: TKIP encryption specified but unused by any of the specified
	Authentication		methods
	Warning: CCMP encryption specified but unused by any of the specified
	Authentication		methods
	Note: Settings for Protocol Modes IBSS Create or IBSS Join appear
	to be complete
	Note: Settings for Open Authentication appear to be complete
See also	• "revert" on page 61.

•The “set” commands (“set user,” “set network,” “set serial,” etc.). Entering a set command without any options displays the same information as that displayed by the “show” command.

•"set wlan" on page 241 for the encryption and authentication methods and protocol modes referenced in the "show wlan" output.

Chapter 2 Command Descriptions 253