Digi 90000566_H manual Service Services Provided Network, Port Number

set service

		Default
Service	Services Provided	Network
		Port Number
Advanced Digi Discovery Protocol	Discovery of Digi Connect products on a network.	2362
(ADDP), also known as
Device Discovery
Encrypted (Secure) RealPort	Secure Ethernet connections between COM or TTY	1027
	ports and device servers or terminal servers.
Hypertext Transfer Protocol	Access to web pages for configuration that can be	80
(HTTP), also known as	secured by requiring a user login.
Web Server
Hypertext Transfer Protocol over	Access to web pages for configuration that can be	443
Secure Socket Layer (HTTPS),	secured by requiring a user login, with encryption for
also known as Secure Web Server	greater security.
Line Printer Daemon (LPD)	Allows network printing over a serial port.	515
Modem Emulation Pool (pmodem)	Allows the Digi Connect product to emulate a modem.	5000
	Modem emulation sends and receives modem
	responses to the serial device over the Ethernet
	instead of Public Switched Telephone Network
	(PSTN). Telnet processing can be enabled or
	disabled on the incoming and outgoing modem-
	emulation connections. The pmodem service is for
	connecting to whatever serial port will answer.
Modem Emulation Passthrough	Allows the Digi Connect product to emulate a modem.	5001
	This service is for dialing in to a particular serial port
	that has been set up for modem emulation.
RealPort	A virtual connection to serial devices, no matter	771
	where they reside on the network.
Remote login (Rlogin)	Allows users to log in to the Digi Connect device and	513
	access the command-line interface via Rlogin.
Remote shell (Rsh)	Allows users to log in to the Digi Connect device and	514
	access the command-line interface via Rsh.
Secure Shell (SSH)	Allows users secure access to log in to the Digi	22
	Connect device and access the command-line
	interface.
Secure Shell (SSH) Passthrough	Accessing a specific serial port set up for SSH.	2501
Secure Socket Service	Authentication and encryption for Digi Connect	2601
	devices.
Simple Network Management	Managing and monitoring the Digi Connect device.	161
Protocol (SNMP)	If you want to run SNMP, but in a more secure
	manner, note that SNMP allows for “sets” to be
	disabled.This securing is done in SNMP itself, not
	through this command.
Transmission Control Protocol	Used for testing the ability to send and receive over a	7
(TCP) Echo	TCP connection, similar to a ping.
Telnet	Allows users an interactive Telnet session to the Digi	23
	Connect product’s command-line interface.

194 Chapter 2 Command Descriptions