Digi 90000566_H manual Options, Binary=onoff, Crmod=onoff

mode mode

Devices	This command is supported in Digi Connect Family products only and not
supported	in Digi Cellular Family products or ConnectPort Display.
Purpose	Changes or displays the operating options for a current Telnet session.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions telnet=execute” to display or set Telnet operating
	options. See "set permissions" on page 157 for details on setting user
	permissions for commands.
Syntax	Change Telnet options
	mode [options]
	Display Telnet options
	mode
Options	options
	The operating options for a current Telnet session, which are as follows:
	binary={onoff}
	Enables or disables Telnet binary mode is enabled or disabled.
	“binary=on” turns on binary mode, which means that all transmitted
	and received characters are converted to binary during this Telnet
	session. “binary=off” turns off binary mode off for this Telnet session.
	The default is off.
	crmod={onoff}
	Specifies whether line feeds are added to received carriage returns.
	“crmod=on” specifies that line feeds are added to received carriage
	returns. “crmod=off” specifies that line feeds are not added to received
	carriage returns. The default is off.
Examples	Turn on binary mode
	#> mode binary=on
	Add line feed characters
	#> mode crmod=on
	Display operating options
	#> mode
See also	"telnet" on page 255.

50 Chapter 2 Command Descriptions