Digi 90000566_H manual Server=vnc server ipaddrdns name, Port=vnc server network port

set vncclient set vncclient

Devices	This command is supported in ConnectPort Display only.
supported
Purpose	Configures or displays remote-access settings. Your ConnectPort Display
	can provide remote access to a computer on the network or Internet using
	the VNC (Virtual Network Computing) protocol.
	VNC server software must be installed on the remote computer. A VNC
	server is provided on your ConnectPort Display Software and
	Documentation CD.
	You can interact with the remote computer using a keyboard and mouse
	connected to the USB ports on your ConnectPort Display.
Syntax	Configure remote-access settings
	set vncclient [state={onoff}]
	[server=vnc server ipaddrdns name]
	[port=vnc server network port]
	[password=vnc server password]
	[reconnect=0-2000000 seconds]
	[shared={onoff}]
	[localcursor={onoff}]
	[keepalive={onoff}]
	Display current remote-access settings
	set vncclient
Options	state={onoff}
	Enables or disables the connection to a remote computer’s VNC server.
	server={vnc server ipaddrdns name}
	The VNC server’s IP address or DNS name.
	port=vnc server network port
	The network port number to connect to on the VNC server. The default
	port number for VNC servers is 5900.
	password=vnc server password
	The password for logging on to the VNC server.
	reconnect=0-2000000 seconds
	The maximum amount of time to wait before attempting to reconnect to
	the VNC server if the connection cannot be established or lost.
	shared={onoff}
	Specifies whether the VNC server desktop can be shared with other
	clients. If “shared=on,” Other VNC clients can connect to the VNC server
	while your ConnectPort Display is connected.
	localcursor={onoff}
	Enables or disables local mouse cursor handling. Tracking the mouse
	cursor locally can improve mouse performance, especially with a slow
	VNC server or slow network.

226 Chapter 2 Command Descriptions