Digi 90000566_H manual Set group, Options Add, Remove, Id=range

	set group
set group
Devices	This command is supported in Digi Cellular Family products Digi Connect
supported	WAN and Digi Connect RG only.
Purpose	Used to create and manage user groups. You can use “set group” to do the
	following:
	• Add a group. A maximum of 32 groups can be defined.
	• Remove groups.
	• Change group configuration attributes.
	• Display group configuration attributes.
	In order to apply a common set of user settings to more than one user, it
	may be desirable to create a group with the required settings and then
	associate that group with multiple users. If a user is a member of one or
	more groups, the user's effective permissions are the maximum of the
	permissions of the user and all of the groups to which the user belongs.
Required	For Digi Connect products with two or more users, permissions must be set
permissions	to “set permissions s-group=read” to display group configuration attributes,
	and “set permissions s-group=rw” to display and set group configuration
	attributes. See "set permissions" on page 157 for details on setting user
	permissions for commands.
Syntax	Add a group
	set group add id=number newname=string
	Remove a group
	set group remove {id=rangename=string}
	Change group configuration attributes
	set group {id=rangename=string} [newname=string]
	[commandline={onoff}] [menu={noneindexname}]
	[defaultaccess={nonecommandlinemenu}]
	Display group configuration attributes
	set group {id=rangename=string}
	Display group configuration attributes for all groups
	set group
Options	add
	Add a group. New groups are created with no permissions. A maximum
	of 32 groups can be defined.
	remove
	Remove groups.
	id=range
	Specifies the ID or range of IDs of the groups to be acted on.

Chapter 2 Command Descriptions 115