Digi 90000566_H manual Connect=noneexecute, Dhcpserver=noneexecute, Display=noneexecute

set permissions

connect={noneexecute}

Permissions for the “connect” command. (See "connect" on page 22.)

dhcpserver={noneexecute}

Permissions for the "dhcpserver" command. (See "dhcpserver" on page 23.)

display={noneexecute}

Permissions for the “display” command. (See "display" on page 27.)

filesys={nonereadrw}

Permissions for user access to the Digi Connect product’s file system.

none

The user cannot access the file system.

read

The user can read the file system.

rw

The user can read and write the file system.

kill={noneexecute}

Permissions for the “kill” command. (See "kill" on page 49.)

newpass={nonerw-selfrw}

Permissions for the “newpass” command. (See "newpass" on page 51.)

none

The command cannot be executed.

rw-self

The user can set their own password.

rw

The user can set any user’s password.

ping={noneexecute}

Permissions for the “ping” command. (See "ping" on page 52.)

provision={noneexecute}

Permissions for the "provision" command. (See "provision" on page 53.)

reconnect={noneexecute}

Permissions for the “reconnect” command. (See "reconnect" on page 60.)

revert-all={noneexecute}

Permissions for the “revert all” command. (See "revert" on page 61.)

Individual “revert” commands are governed by the permissions for that particular command, but “revert all” uses a different mechanism that bypasses the individual commands.

rlogin={noneexecute}

Permissions for the “rlogin” command. (See "rlogin" on page 66.)

s-accesscontrol={nonereadrw}

Permissions for the “set accesscontrol” command. (See "set accesscontrol" on page 68.)

160 Chapter 2 Command Descriptions