Digi 90000566_H manual Set rtstoggle

set rtstoggle

Devices supported

Purpose

set rtstoggle

This command is supported in the following products:

•Connect Family: All products.

•Digi Cellular Family: All products except Digi Connect WAN. Not supported in ConnectPort Display.

Used to:

•Enable or disable RTS toggle on a given serial port. RTS toggle is used to raise RTS when sending data.

•Display current RTS toggle settings.

Required	For Digi Connect products with two or more users, to use this command,
permissions	permissions must be set to one of the following:
	• For a user to display the RTS toggle settings for the line on which they
	are logged in: “set permissions s-rtstoggle=r-self”
	• For a user to display the RTS toggle settings for any line:
	“set permissions s-rtstoggle=read”
	• For a user to display and set the RTS toggle settings for the line on
	which they are logged in: “set permissions s-rtstoggle=rw-self”
	• For a user to display the RTS toggle settings for any line, and set RCI
	serial settings for the line on which the user is logged in:
	“set permissions s-rtstoggle=w-self-r”
	• For a user to display and set the RTS toggle settings on any line:
	“set permissions s-rtstoggle=rw”
	See "set permissions" on page 157 for details on setting user permissions
	for commands.
Syntax	Enable or disable RTS toggle
	set rtstoggle port=range [state={onoff}]
	[predelay=delay] [postdelay=delay]
	Display current RTS toggle settings
	set rtstoggle [port=range]
Options	port=range
	Used to specify the serial port. Optional on a single-port device.
	state={onoff}
	Used to enable or disable the RTS toggle feature.
	on
	Enables the RTS toggle feature.
	off
	Disables the RTS toggle feature.
	The default is “off.”

Chapter 2 Command Descriptions 187