RCA DVD Home Theater System Troubleshooting and Specs

General Controls

Main Unit

1	11
2
3
	10
4

General Controls

			1
		5
2		6
		7
3		8
4
9	10

10.DISTANCE

Adjusts the speakers’ distance.

11. / / /

•	Press	/	to select among setting items in
	Setup mode.
•	Press	/	to adjust the values when the
	display shows the setup you want
	to change.
• In AM/FM mode, press TUNER - and
	TUNER + to tune down or up the

Operating Your Unit

Selecting Source

When one of the SOURCE buttons on the front panel or on the remote control is pressed, the input corresponding to the name will

be activated.

The unit acts as a switching device between all the sources that are plugged into it.

Example 1:

If you have connected a DVD player to the DVD

Playing a DVD with the unit

1.Connect a DVD player to the unit.

2.Press ON/STANDBY on the main unit or press ON•OFF on the remote control to switch on the unit.

3.Press DVD/DVR on the main unit to select the DVD source.

4.Switch ON the DVD player and start playback.

5.Set the sound mode if needed (see "Advanced Sound Control" for details).

Operating Your Unit

Automatic Preset Programming	Connecting/Disconnecting USB Device to
1. Press AM/FM to enter the AM/FM mode.	the Main Unit
2. Press and hold AM/FM for two seconds to	Insert the USB device's port into the USB jack of
start automatic preset programming.	the unit. Unplug the device to disconnect.
3. Radio frequencies will be browsed and radio
stations stored automatically. When all the	USB Device Playback Features
available radio stations are stored or all 40	(Only support MP3/WMA file)
(30 preset stations for FM and 10 preset	1. Press USB on front panel or remote control
stations for AM) memory locations are full,	to select USB mode.
the auto preset programming function	2. Press	to start playback or press	to
will stop.	pause playback.

5 6 7 8 9

11

radio frequency.

12.MUTE

Mutes all sound.

input on the unit, press DVD/DVR on the front panel or on the remote control to receive the sounds transmitted by the DVD.

Example 2:

Example:

To play Dolby Prologic II Movie sound, press the SURROUND buttons until "Dolby PL II MOVIE" appears on the Display.

Manual Preset

1. Tune to a radio station (see “Manual tuning”

for details).

2. Press MEMORY. While the Program Preset

3. Press	to end playback.
4. Press CH+/- on the remote control or		/
on the front panel to skip to the previous or
next file.
5. Press REPEAT on the remote control to select

1. ON/STANDBY

Turns on/off the unit. When the unit is turned on, the unit will go to the mode it was in before powered off.

2.

Starts and pauses playback in USB mode.

3.

Stops playback in USB mode.

4. / (PRESET buttons)

Selects preset stations in AM/FM mode. Directly accesses the previous or next track in

USB mode.

5. USB jack

Connects USB devices.

6. LINE IN

Connects components for audio input.

7. / (SURROUND buttons)

Selects among digital sound processors.

(STEREO, HALL, CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE)

8.DVD/DVR, TV, SAT.CAB, AM/FM, VCR, USB and LINE-IN (SOURCE buttons) Selects sound source.

9.Headphones jack

10.MASTER VOLUME Adjusts the volume.

11.SUBWOOFER

Selects among subwoofer output levels. (SOFT

SUBWOOFER, BALANCE SUBWOOFER, STRONG SUBWOOFER, POWERFUL SUBWOOFER)

Remote Control

Install "AAA" ("UM-4"/"R03") batteries to the remote control prior to use.

1. ON•OFF

Turns on/off the unit.

2. Number buttons

Directly accesses a preset station in AM/FM mode.

3. MEMORY

Stores station in AM/FM mode.

4. MONO/ST

Selects between Stereo and Mono sound in FM mode.

5. TEST TONE

Speaker test tone setting. Refer to “Advanced Sound Control” for details.

6. NIGHT

Selects among night mode options (DRC OFF, SOFT and ON) which compresses the volume difference between normal voices and sounds such as explosions. (Available only during Dolby digital signal playback)

12	14
	13
15	16
	17
	18
19

7. EQ

Selects among preset equalizer mode (FLAT, POP, JAZZ, ROCK, CLASSIC, BASS and TREBLE). Press / to adjust the bass or treble level. This function is only available in Stereo mode.

8. SURROUND

Selects digital sound processors. (STEREO, HALL,

CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE)

9. SETUP

Enters Setup mode. Use / to select among setup options. (DIMMER,CENTER SPK YES/NO,SURROUND SPK YES/NO, COAXIAL/OPTICAL, FRONT SURROUND, ROOM SMALL/MID/LARGE).

13. SUBWOOFER

Selects among subwoofer sound levels. (SOFT

SUBWOOFER, BALANCE SUBWOOFER, STRONG SUBWOOFER, POWERFUL SUBWOOFER)

14.LEVEL

Speaker level setting. Refer to “Advanced Sound Control” for details.

15.VOL + / VOL - Adjusts the volume.

16.CH+ / CH-

Selects programmed stations in AM/FM mode. Directly accesses the next or previous file in USB mode.

17.Operation Buttons (In USB mode only)

•Press PLAY, STOP and PAUSE to access the relative functions.

•Press REV or FWD starts reverse or forward accelerated play.

•Press DISPLAY to access MP3/WMA ID3 information and current play time,current play Folder and Track number,Play Mode.

•Press REPEAT to access the repeat function.

•Press RANDOM to turn on/off random playback.

•Press INTRO to enter intro mode.

18.SLEEP

Enters sleep mode and selects sleep time.

19.Source buttons Selects audio sources.

Based on the example 1, the DVD is playing , if a VCR is connected to the VCR input of the unit, press VCR on the front panel or on the remote control. The sound from the VCR source will replace the DVD.

You can connect up to 6 audio sources to this amplifier:

SOURCE	SOURCE buttonsCorresponding
buttons on	on remote	connector at the
front panel	control	rear panel
DVD/DVR	DVD	DVD
TV	TV	TV
SAT•CAB	SAT	SAT/CAB
AM/FM	AM/FM	built-in
VCR	VCR	VCR
USB	USB	USB jack at front
		panel
LINE-IN	LINE IN	Line in jack at
		front panel

The source name selected shown on the display.

Notes:

•Your unit has a built in tuner. Just connect the appropriate antenna to the back of the unit and you will be able to listen to radio stations. (See details in

Radio section)

•Other sources can be connected to the above standard source.

•Connections at the back panel can be interchanged if sources have the same audio input. Example, you can connect a TV to VCR inputs and connect a VCR to TV input.

To play Dolby Digital sound, the source must be connected to the unit via the optical or coaxial terminal. Refer to "Input Signal Setting" of "Advanced Sound Control"for details.

Radio

The unit has a built-in tuner that allows for AM/FM radio function.

Manual Tuning

1.Connect the FM antenna and the AM loop antenna at the back of the unit. Rotate the AM loop for better reception.

2.Press AM/FM.

3.Tune a station by pressing TUNER+/- repeatedly until the desired station is found. Alternatively, you can press and hold the same buttons down for about one second to activate the automatic search function. In this mode the unit will automatically tune frequencies until it finds a station.

4.Repeat step 3 to tune to another radio station.

5.Press AM/FM to select between FM and AM.

Storing Radio Stations

The unit can store up to 40 radio stations (30 preset stations for FM and 10 preset stations for AM) in its memory. You can enter every single radio station yourself or the unit can store all available radio stations automatically in ascending order.

number is still flashing, input your desired

preset number using the numeric buttons or

press CH+/-, then press MEMORY to store it.

Retrieving Preset Stations

1.Press AM/FM to enter the Tuner mode.

2.Press CH +/- to search up or down for the preset stations or directly press the numeric buttons.

Tips:

•When the FM station broadcasts Stereo sound is found, STEREO is displayed.

•When you tune at a weak FM station manually, press MONO/ST on remote control to switch from Stereo to Mono mode. This will reduce the background noise.

•If there is any interference, change the antenna’s position until ideal sound reception is obtained. TV and other electronic devices could be the cause of interference, so try to position the antenna away from them.

•A weak signal can affect the “Automatic preset programming” function’s efficiency. Adjust the antenna for better reception and a more efficient search.

USB Mode

This unit allows you to connect your own USB storage devices such as mp3 players and USB flash memory. Connect the USB device first then you can start playback.

repeat mode. (REPEAT ONE, REPEAT FOLDER,

REPEAT ALL, REPEAT OFF)

6. Press RANDOM on the remote control to

select random play mode. (RANDOM ON,

RANDOM OFF)

7. Press INTRO on the remote control to turn

on/off intro mode. The unit will play the first

ten seconds of each track on the USB device.

8. Press DISPLAY on the remote control to

select among mp3/WMA ID3 information,

elapsed time,current play Folder and Track

number and Play Mode.

Line in Mode

1.Connects one end of the 3.5mm stereo cable to the line in connector on the front panel of the unit and the other to the line out or headphone jack on an external source.

2.Press LINE-INon the front panel or the remote control to select line in mode.

Tips:

•The songs in the root directory will be played first before all the sub-folders and songs under the first folder is played.

•This unit supports over 64K WMA bitrate.

•Maximum ID3 characters that can be displayed are 30 characters

•Only English characters are supported. Other characters may not be

shown properly.

Advanced Sound Control

Sound Enhancement Systems

This unit is equipped with several built-in sound enhancement systems.

Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of

Dolby Laboratories.

Dolby 3 Stereo

The 3 Stereo mode will redirect the Surround signals to the front left and right speakers when only the front and center speakers are used.

Stereo

Front Left		Front Right
Speaker	Center Speaker	Speaker
Front Left Speaker		Front Right Speaker

Advanced Sound Control

Fine Setting of the Components

You can select the surround mode by pressing SURROUND repeatedly to select among different options. (STEREO, HALL, CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC,

DOLBY PL II MOVIE)

The default surround modes for different components are listed in the table below The unit will keep the last selection in memory.

Digital Input

Select this setting to play digital signals from a DVD or SAT.

Source	Default input
DVD/DVR	Coaxial (DVD/COAX)
TV	Analog (TV/ANL)
SAT•CAB	Optical (SAT/OPT)
AM/FM	Built-in tuner
VCR	Analog (VCR/ANL)
USB	Digital
LINE-IN	Analog

Advanced Sound Control

Speaker Configurations	Front Surround Sound Effect (FSsE) Setting
You can also change the setup of the speakers.	1. Press SETUP button on remote control to
	show setup options.
Use a subwoofer to enjoy optimum sound.
	2. Press	/	until F SURR N is displayed.
For optimum surround experience measure the	3. Press	/	to select between Y(Yes) and
distance between the speaker and your favorite	N (No).
listening position. Press DISTANCE to adjust	4. Press	/	until ROOM is displayed.
the speakers’ distance.	5. Press	/	to select among S (SMALL),
	M(MID), L(LARGE).
1. Press the DISTANCE button to show	Your selection will be stored automatically.
setup options.

Troubleshooting Tips

Unit/AM/FM Operation

ST indicator is off.

•Adjust the antenna.

•Press MONO/ST button to insure you are not outputting in mono.

The signal is Mono. Severe hum or noise.

• The signal is too weak. Connect an
	external antenna.
•	Adjust antenna.
•	Reposition antenna away from

•The remote is not pointed at the remote control sensor on the main unit or there is an obstacle between the remote and the

main unit.

•The remote control is too far from the main unit, move closer.

General

No audio.

• Make sure the speakers are connected.

• Check the input connections.

Dolby Digital

The Dolby Digital mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides better sound quality and more powerful presence than conventional Dolby Surround.

This unit is equipped with Dolby Digital 5.1- channel so that you can enjoy enhanced full digital surround sound. Being different from Dolby Pro Logic in which only four channels (Front Left, Front Right, Center and Rear) are used, the new system provides stereo separation of the rear speakers (Rear-Right, Rear-Left). These 5 channels, together with the subwoofer channel for bass sounds (counted as

0.1channel), constitute as 5.1-Channel (or 6 Channels) Input for Dolby Digital that brings you the most sophisticated sound enjoyment.

Dolby Pro Logic II

Listening

Zone

The Stereo mode uses the two main channel outputs from the front speakers. Use this mode if you have connected the front speakers only.

DSP (Digital Sound Processor)

These digital sound effects resemble sounds in a real environment such as (STEREO, HALL,

CHURCH, CLUB, STADIUM, STUDIO, 3 STEREO, DOLBY PL EMULATION, DOLBY PL II MUSIC, DOLBY PL II MOVIE). DSP automatically converts analog audio signals to digital ones

Source Input	If digital input	If analog input is
	(optical or	selected
	coaxial) is
	selected
DVD/DVR	Dolby Digital	N/A
TV	N/A	Pro Logic II Movie
SAT•CAB	Dolby Digital	N/A
AM/FM	AM/FM	Stereo
VCR	N/A	Pro Logic II Movie
USB	N/A	Stereo
LINE-IN	N/A	Stereo

Input Signal Setting

The unit defaults to the most convenient settings for your easiest use (see table).

If your connection is different from the default setting,

Analog Input

This unit is defaulted to play analog signals from TV, VCR and line-in.

Fine Setting of the Speakers

All the basic settings have already been pre-set for the speakers included in the box.

Also, to make the surround sound more effective and suit the acoustic conditions in your listening room, you may need to delay the signal coming from some of the speakers. Channel delay compensates for center or surround speakers that are closer to the listening position than the front speakers.

2. Press the DISTANCE until the speaker you		You can use this function if placing the rear
	want to change is displayed.	speakers (surround speakers) at the back is not
3. Press / to change the speaker		a good choice for you. See “Speaker
	settings.Your selection will be	Configurations/Front Surround Mode Speaker
	stored automatically.	Placement” for details)
4. Repeat step 2 and 3 to set up the		You can use this function to control different
	next speaker. You may adjust the distance
	within the following ranges:	levels of surround sound. You can select among
• Front Speaker distance (FRNT): 0-30 ft		SMALL, MID, LARGE according to your
•	Center Speaker distance (CNTR): 0-30 ft	room size:
•	Rear Speaker distance (SURR): 0-30 ft	SMALL: room size below
5. When set up is done, wait for five seconds to		12ft x12 ft (3.6m x3.6m)
	automatically save your settings or press any	MID: room size between
	buttons to save your selection and set	12ft x12ft – 16ft x16 ft (5m x5m)
	up mode.	LARGE: room size over 16ft x16ft.
Factory defaulted Advance setting		Center/Surround Speaker Setup
indication from VFD		1. Press SETUP button on remote control to
The unit has defaulted the		show setup options.
following distances:		2. Press / until CTR YES or SURR YES

any electronics.

There is interference to FM reception.

•Turn off other electrical units (e.g. DVD, CD player) near the unit.

Remote Control Operation

The remote control does not operate the unit.

•No batteries installed. (included with your system) Install the batteries before attempting to operate the remote. Be sure to match the + and - ends of each battery to the symbols shown in the remote battery compartment.

•The batteries are weak. Replace all batteries.

• Check the power cord connections.
• Make sure MUTE is off.
•	Make sure the digital setting (optical, coaxial
	or analog) is correct.
•	Check that the headphone is not inserted.

No audio from one channel.

•Check the speaker level setting.

•Check the speaker wire or external source cable connections.

Noise occurs when the TV is turned on.

• The TV is too close to the audio system.

The Pro Logic II mode uses the built-in circuit to steer the Left, Center, Right and Surround left and right channel audio signals and uses all five speakers to play both stereo and Dolby Pro Logic program source, such as TV and VCR. Dolby Pro Logic II includes Dolby Pro Logic II Movie, Dolby Pro Logic II Music and Dolby Pro Logic Emulation.

You can use this mode with any stereo program source (such as VCR/SAT) to enjoy multi-channel sound experience.

Front Left		Front Right
Speaker	Center Speaker	Speaker
Front Left Speaker		Front Right Speaker
		Subwoofer
	Listening
	Zone
Left Sp aker		Right Speaker
Rear Left		Rear Right
Speaker		Speaker

which enables you to adjust the sound without degrading the sound quality. Different modes will give you different feels of size and types of listening environment.

Dynamic Bass Amplified System (dBas) With “Dynamic Bass Amplified System” (dBas), the discrete amplifier is located in the unit so the subwoofer keeps the power needed to reproduce powerful effects. Four settings are available: SOFT, BALANCE, STRONG

and POWERFUL.

Press SUBWOOFER to select the subwoofer (dBas) effects level according to your needs.

1.Select the source

2.Press the SETUP button to show setup options.

3.Press / until OPTICAL or COAXIAL is displayed.

4.Press / to select among optical/ coaxial to match your connection. Your selection will be stored automatically.

Testing Speaker Loudness

You can listen to the loudness of the individual speakers.

1.Press TEST TONE on the remote control. A short noise will be heard in the speakers one by one. The speaker having the noise at that moment will be shown in the display.

2.Turn the VOLUME knob or press

VOL + or VOL - on the remote control to adjust the master volume (if necessary).

3.Press TEST TONE to exit.

Adjust Individual Speaker Volume

1.To adjust individual speaker volume level, press LEVEL on the remote control.

2.Continue to press LEVEL on the remote control to select the channel to be adjusted, then press / to adjust the level.

•	Front speakers (FRNT)			15 ft	is displayed.
•	Center speaker (CNTR)			15 ft	3. Press		/	to select between YES and NO.
•	Rear speakers (SURR)			10 ft
	Front	Center		Front
	Left			Right		Notes:
			Cch		• CTR stands for Center Speaker selection
						while SURR stands for Surround
Lch				Rch		Speaker selection.
					• By default, the Center and Surround
						Speakers are set to YES. If you decide not
						to use them, set the ones you do not
						intend to use to NO so the sound
	L/S			R/S		performance is not affected.
					VFD Dimmer Setup
	Rear			Rear
	Left			Right	1. Press SETUP button on remote control to
					show setup options.
					2. Press		/	until DIMMER 0 is displayed.
					3. Press		/	to select between 0 and 1.

Care and Maintenance

Disconnect the audio system from the power source before performing any maintenance.

Cleaning the Exterior

Disconnect the system from AC power before cleaning the exterior of the system with a soft dust cloth, or with a slightly damp leather chamois. Never use strong solvents.

Important Battery Information

•Remove the batteries to avoid leakage if you do not use your remote control for more than one month.

•Discard leaky batteries immediately as leaking batteries may cause skin burns or other personal injuries.

•Dispose of batteries in the proper manner, according to provincial and local regulations.

•Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if all batteries are not replaced at the same time, if disposed of in fire, or if an attempt is made to charge a battery not intended to be recharged.

Care and Maintenance

Safety Precautions

•Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician.

•Never operate this product with the cabinet removed.

•Do not touch the player with wet hands. If any liquid enters the player cabinet, take the player to a trained technician for inspection.

•The apparatus shall not be exposed to dripping and splashing.

•No object filled with liquids, such as vases, shall be placed on the apparatus.

•No naked flame sources such as lighted candles, shall be placed on the apparatus.

U.S. Limited Warranty

What your warranty covers:

• Defects in materials or workmanship.

For how long after your purchase:

•One year from date of purchase.

•The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.

What we will do:

•	Provide you with a new, or at our option, a refurbished unit. The exchange unit is under
	warranty for the remainder of the original product’s warranty period.
•	Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the
	product is within the warranty period must be presented to obtain warranty service. For rental

U.S. Limited Warranty Note

Product Registration:

•Please complete and mail the Product registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage.

Limitation of Warranty:

•	THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT.
	ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
	OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY
	DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS
	AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE
	SCOPE OF THIS WARRANTY.
•	REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE

Technical Specifications

Amplifier Section

RMS Output Power: Dolby Digital Mode with 10% Total Harmonic Distortion

Front, Rear and Center Channels:

167 Watts per Channel (1KHz, 8 Ohm) Subwoofer Channel: 167 Watts (100Hz, 8 Ohm) Total RMS Output Power,

Dolby Digital mode : 1000 W

FTC Output Power: Dolby Digital Mode with 10% Total Harmonic Distortion

Front Channels (L and R ): 75 Watts per channel (1KHz, 8 Ohm)

Rear Channels (L and R): 75 Watts per channel (1KHz, 8 Ohm)

Center Channel: 155 Watts (1KHz, 8 Ohm)

Subwoofer Channel: 155 Watts (80Hz, 8 Ohm) Total FTC Output Power,

Dolby Digital mode: 610 Watts

Muting Attenuation: 65dB

Frequency Response: 200Hz/-3dB, 1kHz ref. Subwoofer Frequency Response:

10 Hz / -3db, 80Hz ref. Signal to Noise Ratio: 65dB (Dolby digital mode)

AM Tuner Section

Frequency Response: 2kHz +/-6dB, 1kHz ref.

Usable Sensitivity: 800uV/m @ S/N 20dB

Signal to Noise: 38dB

IF Rejection: 35dB

FM Tuner Section

Frequency Response: 15kHz +/-3dB, 1kHz ref.

Quieting: 24dBu

Signal to Noise: 60dB(stereo) / 65dB(mono)

IF Rejection: 50dB

Dimensions (H x W x D mm)

Unit: 430 x 140 x 347

Front and Surround Speakers: 143 x 80.5 x 93.7

Center Speaker: 80.5 x 271 x 72

Subwoofer: 355 x 195 x 325

firms, proof of first rental is also required.

How to make a warranty claim:

•Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials.

•Include evidence of purchase date such as the bill of sale. Also print your name and address and a description of the defect. Send via standard UPS or its equivalent to:

Thomson Inc.

Product Exchange Center

11721 B Alameda Avenue

Socorro, Texas 79927

•Insure your shipment for loss or damage. Thomson accepts no liability in case of damage or loss en route to Thomson.

•Pay any charges billed to you by the Exchange Center for service not covered by the warranty.

•A new or refurbished unit will be shipped to you freight prepaid.

What your warranty does not cover:

•Customer instruction. (Your Owner’s Manual provides information regarding operating Instructions and user controls. For additional information, ask your dealer.)

•Installation and set-up service adjustments.

•Batteries.

•Damage from misuse or neglect.

•Products which have been modified or incorporated into other products.

•Products purchased or serviced outside the USA.

•Acts of nature, such as but not limited to lightning damage.

REMEDY OF THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING

OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS

DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF

THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON

THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

How state law relates to this warranty:

•Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

•This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.

If you purchased your product outside the USA:

This warranty does not apply. Contact your dealer for warranty information.