Hearth and Home Technologies TIARAI-BK-B I. Positioning the Logs - Tiara II-B, K. Embers, #1 #3

I. Positioning the Logs - Tiara II-B K. Embers

#1

Figure 8.23 Place rear log onto the two locating pins located on the rear log shelf in the back of the firebox.

Place individual pieces of embers in front of and around the gas log where they can be seen. Space them so that gas can contact them on all sides. Try to avoid stacking the embers on top of each other. This will assure maximum brightness and efficient use of the catalyst promoting brighter, cleaner burning embers.

NOTE: Do not block gas ports.

L. Accessories

Install approved accessories per instructions included with accessories. Refer to Section 12 for appropriate accesso- ries.

#2

#1

#3

WARNING

Shock or fire risk.

Use ONLY optional accessories approved for this appliance.

Figure 8.24 Place left and right logs into recesses cut out for them on the left and right side of the burner. Log installation is complete.

J. Mineral Wool

• Using non-listed accessories voids warranty.

• Using non-listed accessories may result in a safety hazard.

•Only Hearth & Home Technologies approved accessories may be used safely.

WARNING

Explosion Risk.

•Follow ember placement instructions in manual.

•Do NOT place embers directly over burner ports.

•Replace ember material annually.

Improperly placed embers interferes with proper burner operation.

Figure 8.25 Apply dime size pieces sparingly along front edge of burner. Do not completely block ports.

Page 34 Heat & Glo · Tiara I B & Tiara II B · 7010-149M August 1, 2008