Listening to a radio broadcast
English
Cursor (5//)
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.
On the main unit ONLY:
FSTANDBY/ON 
button
PHONES
4 ¢
You can tune in to FM or AM.
Selecting a station
1 Press FM/AM.
Each time you press the button, the band will be alternated between FM and AM.
Example:
Frequency
2 Press TUNING 
or TUNING 
to select the station (frequency).
Automatic tuning:
Hold down TUNING 
or TUNING 
until the system starts searching, and then release the button.
When a station of sufficient signal strength is tuned in to, the system stops searching automatically.
To stop searching manually, press TUNING 
or TUNING 
.
Manual tuning:
Each time you press TUNING 
or
TUNING 
, the frequency changes.
•When an FM stereo program is received, the “ST” (Stereo) indicator lights.
•You can also select the station with cursor 5//.
NOTE
If the stereo FM program currently tuned in to is noisy, you can improve the reception by pressing FM MODE to switch to the monaural mode (“MONO” lights). If you press FM MODE again, or tune in to another station, the receiving mode returns automatically to the stereo mode.
To select 10 kHz intervals, while holing down ¢ on the main unit in Standby mode, press
FSTANDBY/ON on the main unit to turn on the power. “10 kHz” appears on the display window.
To select 9 kHz intervals, while holing down 4 on the main unit in Standby mode, press
FSTANDBY/ON on the main unit to turn on the power. “9 kHz” appears on the display window.
NOTE
If the interval spacing is switched, the memory in which the radio stations were stored will be erased.
33
