Connecting up – Do not turn on the power until the connection is complete –

Connection

Connecting antennas

Connecting AM loop antenna (supplied)

1 Set up the AM loop antenna.

2 Connect antenna cords.

Main unit

How to insert antenna cords

(rear panel)

Connect two antenna cords as described above.

 

 

If the antenna cord is

Black

White

covered with vinyl on the

tip, twist and pull the vinyl

 

 

off and remove.

3Turn the AM loop antenna to the direction of the best radio reception.

Locate the AM loop antenna as far away from the main unit as possible.

Do not locate the AM loop antenna on a metallic table or close to a TV, personal computer, etc. Otherwise it may result in bad radio reception.

7When good radio reception cannot be obtained with the supplied AM loop antenna

Electric wire: 3 - 5m (commercially available)

Electric wire

Put up an electric

 

Twist

wire extending

horizontally,

 

AM loop

preferably at a high

antenna

place such as

 

above a window or

 

outdoors.

Main unit

Connect the AM loop

antenna cords together.

(rear panel)

 

Connecting FM antenna (supplied)

(/ %1#:+#.

FM antenna

Main unit

(rear panel)

Put the antenna up straight in the direction where the best radio reception can be obtained, and fix by using tape.

7When good radio reception cannot be obtained with the supplied antenna or when using a communal antenna

 

Antenna cord (sold

Communal

 

separately)

antenna terminal

 

or

Outdoor FM antenna

 

 

(commercially

 

 

available)

Main unit

Converter

Coaxial cable

(commercially

(rear panel)

(sold separately:

 

compatible with 300C/ available)

 

75C)

 

Depending on the radio reception conditions, an FM feeder antenna (sold separately: compatible with 300C) can be used. In the case, a converter (sold separately) is required.

For details of connecting a separately sold antenna, refer to the user guide for the antenna or converter.

When positioning the antenna, listen to an actual radio program (refer to “Listening to a radio broadcast” on page 33).

9

Page 100
Image 100
JVC EX-A1 manual Connection, Set up the AM loop antenna Connect antenna cords