D-Link dws-1008 Wired Authentication, Port Control, Keys, Bonded Authentication, Reauthentication

802.1X Management Commands

Use 802. IEEE X management commands to modify the default settings for IEEE 802.1X sessions on a DWS-1008 switch. For best results, change the settings only if you are aware of a problem with the switch’s 802.1X performance.

This chapter presents 802.1X commands alphabetically. Use the following table to locate commands in this chapter based on their use.

Caution: 802.1X parameter settings are global for all SSIDs configured on the switch.

Wired Authentication	set dot1x port-control on page 248
Port Control	clear dot1x port-control on page 242
	set dot1x authcontrol on page 245
Keys	set dot1x key-tx on page 247
	set dot1x tx-period on page 251
	clear dot1x tx-period on page 245
	set dot1x wep-rekey on page 252
	set dot1x wep-rekey-period on page 252
Bonded Authentication	clear dot1x bonded-period on page 241
	set dot1x bonded-period on page 246
Reauthentication	set dot1x reauth-max on page 249
	clear dot1x reauth-max on page 243
	set dot1x reauth-period on page 250
	clear dot1x reauth-period on page 243
Retransmission	set dot1x quiet-period on page 249
	clear dot1x quiet-period on page 242
	set dot1x timeout auth-server on page 250
	clear dot1x timeout auth-server on page 244
	set dot1x timeout supplicant on page 251
	clear dot1x timeout supplicant on page 244

D-Link DWS-1008 CLI Manual 240