D-Link dws-1008 Sends or drops all notifications, RFDetectAdhocUserTraps success change accepted

•RFDetectSpoofedMacAPTraps—Generated when MSS detects a wireless packet with the source MAC address of a D-Link AP, but without the spoofed MP’s signature (fingerprint).

•RFDetectSpoofedSsidAPTraps—Generated when MSS detects beacon frames for a valid SSID, but sent by a rogue AP.

•RFDetectUnAuthorizedAPTraps—Generated when MSS detects the MAC address of an AP that is on the attack list.

•RFDetectUnAuthorizedOuiTraps—Generated when a wireless device that is not on the list of permitted vendors is detected.

•RFDetectUnAuthorizedSsidTraps—Generated when an SSID that is not on the permitted SSID list is detected.

all Sends or drops all notifications.

Defaults:A default notification profile (named default) is already configured in MSS.All notifications in the default profile are dropped by default.

Access: Enabled.

Examples: The following command changes the action in the default notification profile from drop to send for all notification types:

DWS-1008# set snmp notify profile default send all success: change accepted.

The following commands create notification profile snmpprof_rfdetect, and change the action to send for all RF detection notification types:

DWS-1008#set snmp notify profile snmpprof_rfdetect send

RFDetectAdhocUserTraps success: change accepted.

DWS-1008#set snmp notify profile snmpprof_rfdetect send

RFDetectClientViaRogueWiredAPTraps success: change accepted.

DWS-1008# set snmp notify profile snmpprof_rfdetect send RFDetectDoSTraps success: change accepted.

DWS-1008#set snmp notify profile snmpprof_rfdetect send

RFDetectAdhocUserTraps success: change accepted.

DWS-1008#set snmp notify profile snmpprof_rfdetect send

RFDetectInterferingRogueAPTraps success: change accepted.

D-Link DWS-1008 CLI Manual 138