set {ap dap} location

Specifies location information for an AP.

Syntax: set {ap port-list dap {dap-num} location string

ap port-list

dap dap-num location string

List of ports on which to specify location information for directly connected APs.

Number of a Distributed AP for which to specify location information.

Location information for the AP. If the location information includes spaces, enclose the string in quotes.

Defaults: None.

Access: Enabled

Usage: Use this command to specify information about the location of the AP.

Examples: The following command specifies the location of AP 7 as The conference room.

DWS-1008# set ap 7 location ‘The conference room’ success: change accepted.

See Also:

show {ap dap} config

set {ap dap} contact

D-Link DWS-1008 CLI Manual

324

Page 327
Image 327
D-Link dws-1008 Set ap dap location, Specifies location information for an AP, Ap port-list Dap dap-num location string