Examples: The following command configures the read-write community good_community:

DWS-1008# set snmp community read-write good_community success: change accepted.

The following command configures community string switchmgr1 with access level notify-read- write:

DWS-1008# set snmp community name switchmgr1 notify-read-writesuccess: change accepted.

See Also:

clear snmp community

set ip snmp server

set snmp notify target

set snmp notify profile

set snmp protocol

set snmp security

set snmp usm

show snmp community

set snmp notify profile

Configures an SNMP notification profile. A notification profile is a named list of all the notification types that can be generated by a switch, and for each notification type, the action to take (drop or send) when an event occurs.

You can configure up to ten notification profiles.

Syntax: set snmp notify profile {default profile-name}{drop send} {notification-type all}

default profile-name

Name of the notification profile you are creating or modifying. The

 

profile-name can be up to 32 alphanumeric characters long, with no

 

spaces. To modify the default notification profile, specify default.

drop send

Specifies the action that the SNMP engine takes with regard to the

 

notifications you specify with notification-typeor all.

D-Link DWS-1008 CLI Manual

103

Page 106
Image 106
D-Link dws-1008 manual Set snmp notify profile, Default profile-name, Drop send, Link DWS-1008 CLI Manual 103