D-Link dws-1008 manual Set radio-profile mode, Syntax set radio-profile name mode enable disable

Defaults: The default maximum receive threshold for DWL-8220AP radios is 2000ms (2 seconds).

Access: Enabled.

Usage: You must disable all radios that are using a radio profile before you can change parameters in the profile. Use the set radio-profile mode command.

Examples: The following command changes the maximum transmit threshold for radio profile rp1 to 4000 ms:

DWS-1008# set radio-profile rp1 max-tx-lifetime 4000 success: change accepted.

See Also:

•set radio-profile mode

•set radio-profile max-tx-lifetime

•show radio-profile

set radio-profile mode

Creates a new radio profile, or disables or reenables all DWL-8220AP radios that are using a specific profile.

Syntax: set radio-profile name [mode {enable disable}]

radio-profilename Radio profile name of up to 16 alphanumeric characters, with no spaces.

Use this command without the mode enable or mode disable option to create a new profile.

mode enable Enables the radios that use this profile.

mode disable Disables the radios that use this profile.

Defaults: Each radio profile that you create has a set of properties with factory default values that you can change with the other set radio-profile commands in this chapter.

D-Link DWS-1008 CLI Manual 346