D-Link dws-1008 manual Set radio-profile auto-tune power-config

set radio-profile auto-tune power-config

Enables or disables dynamic power tuning (RF Auto-Tuning) for the DWL-8220AP radios in a radio profile.

Syntax: set radio-profile name auto-tune power-config {enable disable}

name Radio profile name.

enable Configures radios to dynamically set their power levels when the DWL- 8220APs are started.

disable Configures radios to use their statically assigned power levels, or the default power levels if unassigned, when the radios are started.

Defaults: Dynamic power assignment is disabled by default.

Access: Enabled.

Usage: When RF Auto-Tuning for power is disabled, MSS does not dynamically set the power levels when radios are first enabled and also does not tune power during operation with associated clients.

When RF Auto-Tuning for power is enabled, MSS does not allow you to manually change the power level.

Examples: The following command enables dynamic power tuning for radios in the rp2 radio profile:

DWS-1008# set radio-profile rp2 auto-tunepower-config enable success: change accepted.

See Also:

•set {ap dap} radio auto-tune max-power

•set radio-profile auto-tune channel-config

•set radio-profile auto-tune power-interval

•set radio-profile auto-tune power-lockdown

•set radio-profile auto-tune power-ramp-interval

•show radio-profile

D-Link DWS-1008 CLI Manual 338