D-Link DWS-1008 CLI Manual 482
show security acl
Displays a summary of the security ACLs that are mapped.
Syntax: show security acl
Defaults: None.
Access: Enabled.
Usage: This command lists only the ACLs that have been mapped to something (a user, or VLAN,
or port, and so on). To list all committed ACLs, use the show security acl info command. To list
ACLs that have not yet been committed, use the show security acl editbuffer command.
Examples: To display a summary of the mapped security ACLs on a DWS-1008 switch, type the
following command:
DWS-1008# show security acl
ACL table
ACL Type Class Mapping
----------------------------------------------------------
acl_123 IP Static Port 2 In
acl_133 IP Static Port 4 In
acl_124 IP Static
See Also:
• clear security acl
• commit security acl
• set security acl
• show security acl editbuffer
• show security acl info