D-Link dws-1008 manual Show radio-profile, Syntax show radio-profile name ?

show radio-profile

Displays radio profile information.

Syntax: show radio-profile {name ?}

name Displays information about the named radio profile.

?Displays a list of radio profiles.

Defaults: None.

Access: Enabled.

Usage: MSS contains a default radio profile. D-Link recommends that you do not change this profile but instead keep the profile for reference.

Examples: The following command shows radio profile information for the default radio profile:

DWS-1008#show radio-profile default
Beacon Interval:	100	DTIM Interval:	1
Max Tx Lifetime:	2000	Max Rx Lifetime:	2000
RTS Threshold:	2346	Frag Threshold:	2346
Long Preamble:	no	Tune Channel:	yes
Tune Power:	no	Tune Channel Interval:	3600
Tune Power Interval:	600	Power ramp interval:	60
Channel Holddown:	300	Countermeasures:	none
Active-Scan:	yes	RFID enabled:	no
WMM Powersave:	no	QoS Mode:	wmm

No service profiles configured.

The following table describes the fields in the display:

Field	Description
Beacon Interval	Rate (in milliseconds) at which each AP radio in the profile advertises the
	beaconed SSID.
DTIM Interval	Number of times after every beacon that each AP radio in the radio profile sends
	a delivery traffic indication map (DTIM).
Max Tx Lifetime	Number of milliseconds that a frame received by a radio in the radio profile can
	remain in buffer memory.
Max Rx Lifetime	Number of milliseconds that a frame scheduled to be transmitted by a radio in
	the radio profile can remain in buffer memory.

D-Link DWS-1008 CLI Manual 421