D-Link dws-1008 Show arp, DWS-1008#set timezone PST, Syntax show arp ip-addr, Ip-addr IP address

Defaults: If this command is not used, then the default time zone is UTC.

Access: Enabled.

Examples: To set the time zone for Pacific Standard Time (PST), type the following command:

DWS-1008#set timezone PST -8

Timezone is set to ‘PST’, offset from UTC is -8:0 hours.

See Also:

•clear summertime

•clear timezone

•set summertime

•set timedate

•show summertime

•show timedate

•show timezone

show arp

Displays the ARP table.

Syntax: show arp [ip-addr]

ip-addr IP address.

Defaults: If you do not specify an IP address, the whole ARP table is displayed.

Access: All.

Examples: The following command displays ARP entries:

DWS-1008# show arp
ARP aging time: 1200 seconds
Host	HW Address	VLAN	Type	State

-----------------------------------------------------------------------------------------------

10.5.4.51	00:0b:0e:02:76:f5	1	DYNAMIC	RESOLVED
10.5.4.53	00:0b:0e:02:76:f7	1	LOCAL	RESOLVED

D-Link DWS-1008 CLI Manual 118