D-Link dws-1008 manual Clear dot1x port-control, Clear dot1x quiet-period

clear dot1x port-control

Resets all wired authentication ports on the switch to default 802.1X authentication.

Syntax: clear dot1x port-control

Defaults: By default, all wired authentication ports are set to auto and they process authentication requests as determined by the set authentication dot1X command.

Access: Enabled.

Usage: This command is overridden by the set dot1x authcontrol command. The clear dot1x port-controlcommand returns port control to the method configured. This command applies only to wired authentication ports.

Examples: Type the following command to reset the wired authentication port control:

DWS-1008# clear dot1x port-controlsuccess: change accepted

See Also:

•set dot1x port-control

•show dot1x

clear dot1x quiet-period

Resets the quiet period after a failed authentication to the default setting.

Syntax: clear dot1x quiet-period

Defaults: The default is 60 seconds.

Access: Enabled.

Examples: Type the following command to reset the 802.1X quiet period to the default:

DWS-1008# clear dot1x quiet-periodsuccess: change accepted

See Also:

•set dot1x quiet-period

•show dot1x

D-Link DWS-1008 CLI Manual 242