D-Link dws-1008 manual Set trace authorization, Set trace dot1x, Traces authorization information

set trace authorization

Traces authorization information.

Syntax: set trace authorization [mac-addr mac-address] [port port-num] [user username] [level level]

mac-addrmac-address	Traces a MAC address. Specify a MAC address, using colons to
	separate the octets (for example, 00:11:22:aa:bb:cc).
port port-num	Traces a port number. Specify a port number between 1 and 22.
user username	Traces a user. Specify a username of up to 80 alphanumeric characters
	with no spaces.
level level	Determines the quantity of information included in the output. You can
	set the level with an integer from 1 to 10, where level 10 provides the
	most information. Levels 1 through 5 provide user-readable information.
	If you do not specify a level, level 5 is the default.

Defaults: The default trace level is 5.

Access: Enabled.

Examples: The following command starts a trace for information for authorization for MAC address 00:01:02:03:04:05:

DWS-1008# set trace authorization mac-addr 00:01:02:03:04:05 success: change accepted.

See Also:

•clear trace

•show trace

set trace dot1x

Traces 802.1X sessions.

Syntax: set trace dot1x [mac-addr mac-address] [port port-num] [user username] [level level]

mac-addrmac-addressTraces a MAC address. Specify a MAC address, using colons to separate the octets (for example, 00:11:22:aa:bb:cc).

D-Link DWS-1008 CLI Manual 493