Port Lists

The physical Ethernet ports on a switch can be set for connection to access points, authenticated wired users, or the network backbone. You can include a single port or multiple ports in one MSS CLI command by using the appropriate list format.

The ports on a switch are numbered 1 through 8. No port 0 exists on the switch.You can include a single port or multiple ports in a command that includes port port-list. Use one of the following formats for port-list:

A single port number. For example: DWS-1008# set port enable 4

A comma-separated list of port numbers, with no spaces. For example: DWS-1008# show port poe 1,2,4,6

A hyphen-separated range of port numbers, with no spaces. For example: DWS-1008# reset port 1-4

Any combination of single numbers, lists, and ranges. Hyphens take precedence over commas. For example:

DWS-1008#show port status 1-3,6

D-Link DWS-1008 CLI Manual

Page 11
Image 11
D-Link dws-1008 manual Port Lists, DWS-1008#show port status 1-3,6