D-Link dws-1008 manual Show ap dap config, Shows configuration information for radio

show {ap dap} config

Displays global and radio-specific settings for a DWL-8220AP access point.

Syntax: show ap config [port-list[radio {1 2}]]

Syntax: show dap config [dap-num[radio {1 2}]]

port-list	List of ports connected to the DWL-8220AP access point(s) for which to display
	configuration settings.
dap-num	Number of a Distributed AP for which to display configuration settings.
radio 1	Shows configuration information for radio 1.
radio 2	Shows configuration information for radio 2. (This option does not apply to
	single-radio models.)

Defaults: None.

Access: Enabled.

Usage: MSS lists information separately for each DWL-8220AP access point.

Examples: The following example shows configuration information for a DWL-8220AP access point on port 2:

DWS-1008#show ap config 2

Port 2: AP model: DWL-8220AP, POE: enable, bias: high, name: DWL-8220AP02

boot-download-enable: YES force-image-download: NO load balancing group: none

location: The conference room contact: Bob the IT guy

Radio 1: type: 802.11g, mode: disabled, channel: 6 tx pwr: 1, profile: default auto-tune

max-power: default

Radio 2: type: 802.11a, mode: disabled, channel: 36 tx pwr: 1, profile: default

auto-tune max-power: default

The following example shows configuration information for a Distributed AP access point configured on connection 1:

DWS-1008#show dap config 1

Dap 1: serial-id: 12345678, AP model: DWL-8220AP, bias: high, name: DAP01

fingerprint: b4:f9:2a:52:37:58:f4:d0:10:75:43:2f:45:c9:52:c3 boot-download-enable:

YES

force-image-download: NO load balancing group: none

location: The conference room contact: Bob the IT guy

Radio 1: type: 802.11g, mode: disabled, channel: 6 tx pwr: 1, profile: default

auto-tune max-power: default

Radio 2: type: 802.11a, mode: disabled, channel: 36 tx pwr: 1, profile: default

auto-tune max-power: default

D-Link DWS-1008 CLI Manual 396