D-Link dws-1008 Clear ip dns server, Clear ip route, Syntax clear ip dns server ip-addr, Default

clear ip dns server

Removes a DNS server from a DWS-1008 switch configuration.

Syntax: clear ip dns server ip-addr

ip-addrIP address of a DNS server.

Defaults: None.

Access: Enabled.

Examples: The following command removes DNS server 10.10.10.69 from a switch’s configuration:

DWS-1008# clear ip dns server 10.10.10.69 success: change accepted.

See Also:

•clear ip dns domain

•set ip dns

•set ip dns domain

•set ip dns server

•show ip dns

clear ip route

Removes a route from the IP route table.

Syntax: clear ip route {default ip-addr mask ip-addr/mask-length}default-router

default Default route. Note: default is an alias for IP address 0.0.0.0/0.

ip-addr mask IP address and subnet mask for the route destination, in dotted decimal

notation (for example, 10.10.10.10 255.255.255.0).

ip-addr/mask-lengthIP address and subnet mask length in CIDR format

(for example, 10.10.10.10/24).

default-routerIP address, DNS hostname, or alias of the next-hop router.

D-Link DWS-1008 CLI Manual 79