The following command displays configuration and status information for each VLAN on which the DHCP server is configured:

DWS-1008#show dhcp-server verbose

Interface:

0 (Direct AP)

Status:

UP

Address Range:

10.0.0.1-10.0.0.253

Interface:

default(1)

Status:

UP

Address Range:

10.10.20.2-10.10.20.254

Hardware Address: 00:01:02:03:04:05

State:

BOUND

Lease Allocation:

43200 seconds

Lease Remaining:

12345 seconds

IP Address:

10.10.20.2

Subnet Mask:

255.255.255.0

Default Router:

10.10.20.1

DNS Servers:

10.10.20.4 10.10.20.5

DNS Domain Name: mycorp.com

The table below shows the output for show dhcp-server:

Field

Description

 

 

VLAN

VLAN number.

 

 

Name

VLAN name.

 

 

Address

IP address leased by the server.

 

 

MAC Address

MAC address of the device that holds the lease for the address.

 

 

Lease Remaining

Number of seconds remaining before the address lease expires.

 

 

The table below shows the output for show dhcp-server verbose:

Field

Description

Interface

VLAN name and number.

 

 

 

Status of the interface:

Status

• UP

 

• DOWN

 

 

Address Range

Range from which the server can lease addresses.

 

 

Hardware Address

MAC address of the DHCP client.

 

 

 

State of the address lease:

 

SUSPEND—MSS is checking for the presence of another DHCP server on the subnet.

 

This is the initial state of the MSS DHCP server. The MSS DHCP server remains in this state

 

if another DHCP server is detected.

State

CHECKING—MSS is using ARP to verify whether the address is available.

 

OFFERING—MSS offered the address to the client and is waiting for the client to send a

 

DHCPREQUEST for the address.

 

BOUND—The client accepted the address.

 

HOLDING—The address is already in use and is therefore unavailable.

 

 

Lease Allocation

Duration of the address lease, in seconds.

 

 

D-Link DWS-1008 CLI Manual

155

Page 158
Image 158
D-Link dws-1008 manual Table below shows the output for show dhcp-server verbose, Link DWS-1008 CLI Manual 155