Disables STP.
Enables or disables STP on all VLANs.
VLAN name or number. MSS enables or disables STP on only the specified VLAN, on all ports within the VLAN.
Port number or list and the VLAN the ports are in. MSS enables or disables STP on only the specified ports, within the specified VLAN.
Enables STP.

set spantree

Enables or disables STP on one VLAN or all VLANs configured on a DWS-1008 switch.

Syntax: set spantree {enable disable} [{all vlan vlan-id port port-listvlan-id}] enable

disable all

vlan vlan-id

port port-list vlan-id

Defaults: Disabled.

Access: Enabled.

Examples: The following command enables STP on all VLANs configured on a switch:

DWS-1008# set spantree enable success: change accepted.

The following command disables STP on VLAN burgundy:

DWS-1008# set spantree disable vlan burgundy success: change accepted.

See Also:

• show spantree

set spantree backbonefast

Enables or disables STP backbone fast convergence on a switch. This feature accelerates a port’s recovery following the failure of an indirect link.

Syntax: set spantree backbonefast {enable disable}

enable

Enables backbone fast convergence.

disable

Disables backbone fast convergence.

D-Link DWS-1008 CLI Manual

432

Page 435
Image 435
D-Link dws-1008 manual Set spantree backbonefast, Vlan vlan-id Port port-list vlan-id