D-Link dws-1008 manual Clear port name, Clear port type, Defaults None

clear port name

Removes the name assigned to a port.

Syntax: clear port port-listname

port-list	List of physical ports. MSS removes the names from all the
	specified ports.
Defaults: None.

Access: Enabled.

Examples: The following command clears the names of ports 1 through 4:

DWS-1008#clear port 1-4 name

See Also:

• set port name

clear port type

Caution: When you clear a port, MSS ends user sessions that are using the port.

Removes all configuration settings from a port and resets the port as a network port.

Syntax: clear port type port-list

port-list	List of physical ports. MSS resets and removes the configuration from all
	the specified ports.

Defaults: The cleared port becomes a network port but is not placed in any VLANs.

Access: Enabled.

Usage: Use this command to change a port back to a network port. All configuration settings specific to the port type are removed. For example, if you clear an access point port, all AP- specific settings are removed. The following table lists the default network port settings that MSS applies when you clear a port’s type:

D-Link DWS-1008 CLI Manual 36