D-Link DWS-1008 CLI Manual 306
The table below describes the fields in the show version output.
Field Description
Build Information Factory timestamp of the image file.
Label Software version and build date.
Build Suffix Build suffix.
Model Build model.
Hardware Version information for the switch’s motherboard and Power over Ethernet
(PoE) board.
Serial number Serial number of the switch.
Flash Flash memory version.
Kernel Kernel version.
BootLoader Boot code version.
Port/DAP Port number connected to an access point.
AP Model AP model number.
Serial # AP serial number.
Versions AP hardware, firmware, and software versions.
uninstall soda agent
Removes the contents of a directory containing SODA agent files.
Syntax: uninstall soda agent agent-directory directory
directory Directory on the switch where SODA agent files are to be removed.
Defaults: None.
Access: Enabled.
Usage: Use this command to remove a SODA agent directory and all of its contents. All files
in the specified directory are removed. The command removes the directory and its contents,
regardless of whether it contains SODA agent files.
Examples: The following command removes the directory sp1 and all of its contents:
DWS-1008# uninstall soda agent agent-directory sp1
This will delete all files in agent-directory, do you wish to continue? (y|n) [n]y
See Also:
• install soda agent
• set service-profile soda mode