Panasonic PV-DV953 Installation of ArcSoft Software Suite, ≥Installation begins

2

4

5

1

ªInstallation of ArcSoft Software Suite

1Insert the supplied CD-ROM into the personal computer’s CD-ROM drive.

2Select the software to be installed from [Setup Menu].

3Select the desired language on the

[Choose Setup Language] dialogue, and click [OK].

≥Installation begins.

≥After reading the displayed contents, please carry out the installation according to instructions.

≥If a language other than the OS language is selected, the characters may not be presented correctly.

4When the component selection screen is displayed, check the software to be installed and click [Next].

5After the completion of setup, click on [Finish]

≥Installation will be completed.

≥This instruction manual describes only the procedures for installation, connection and start-up. Please read the Help messages of your software for how to use the ArcSoft Software Suite.

ªTo start software in the ArcSoft Software Suite:

1 Select [Start] >> [All Programs (Programs)] >>

[ArcSoft Software Suite] >> [ArcSoft Panorama Maker 3.0] (or [ArcSoft PhotoBase 4.0] or [ArcSoft PhotoImpression 4.0] or [ArcSoft PhotoPrinter 4.0]).

For Information on ArcSoft Software:

TEL: 1-510-440-9901

FAX: 1-510-440-1270

Web Site: www.arcsoft.com

E-mail: support@arcsoft.com

Refer to Help information about application operations and other Error messages.

61