2

3

4

Using the DV STUDIO 3.1E-SE

ªOperating environment

OS:

IBM-PC/AT compatible personal computer with pre-installed;

Microsoft Windows XP Home Edition/Professional

Microsoft Windows Me (Millennium Edition)

Microsoft Windows 98 Second Edition

CPU:

Intel Pentium II/ Celeron 300MHz or later (including compatible CPU)

Graphic display:

High Color (16 bit) or more.

Desktop resolution of 800k600 dots or more.

RAM:

32 MB or more (64 MB or more is recommended) (128 MB or more are required for Windows XP.)

Free hard disk space:

At least 20 MB

Ports:

USB Terminal

Other requirements:

Mouse

Operation is not guaranteed on Windows 2000.

When 2 or more USB devices are connected to a personal computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed.

When connected to the keyboard USB terminal, normal function may not be possible.

This instruction manual describes only the procedures for installation, connection and start-up. Please read the PDF-based instructions for how to use the DV STUDIO 3.1E-SE.

To view the installed operating instructions, Adobe Acrobat Reader 4.0 or later is required. Please install Adobe Acrobat Reader 5.0 from the supplied CD-ROM.

Before using for the first time, select [Readme] from [Start]>>[All programs (Programs)]>>[Panasonic]>>[DV STUDIO3], and read any supplementary details or updates.

ªInstallation of DV STUDIO 3.1E-SE

1

1

Insert the supplied CD-ROM into the personal computer’s

 

CD-ROM drive.

2Select the software to be installed from [Setup Menu].

3 Click [Next].

After reading the displayed contents, please carry out the installation according to instructions.

4After the completion of setup, click on [Finish]

Installation will be completed.

Sample data is installed concurrently with the DV STUDIO 3.1E-SE software.

 

USB

2

ªTo start DV STUDIO 3.1E-SE

 

 

 

 

1

Set the Palmcorder to VCR Mode or Camera Mode.

 

 

 

 

 

 

 

If you wish to capture data from a tape, set the Palmcorder to VCR

 

 

 

2

Mode and insert the tape.

3

 

 

Connect the Palmcorder to the Personal Computer with

 

 

3

auxiliary USB Connection Cable.

 

 

 

Select [Start] >> [All Programs (Programs)] >> [Panasonic]

>> [DV Studio3]>> [DV Studio3].

If a shortcut icon has been created on the desktop during installation, it is also possible to start by double-clicking on the icon.

58

Page 58
Image 58
Panasonic PV-DV953 Using the DV Studio 3.1E-SE, Installation of DV Studio 3.1E-SE, ªTo start DV Studio 3.1E-SE