Panasonic PV-DV953 Quick Guide, To View the Playback Picture, Charge the Battery. l

1

2

3

1

OPEN/

EJECT

2	PUSH
	CLOSE

Quick Guide

1Charge the Battery. (l 14)

≥Connect the AC Cable to the AC Adaptor and plug it into the AC Wall Outlet.

≥Attach the Battery to the AC Adaptor. (This will start the charging process.)

≥The [POWER] Lamp and [CHARGE] Lamp light up, and charging starts. When the [CHARGE] Lamp goes off, charging is completed.

≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it.

2Attach the Charged Battery to the Palmcorder. (l 14)

3Insert the Cassette. (l 16)

≥Slide the [OPEN/EJECT] 1 Lever toward the front and pull down to open the Cassette Compartment.

≥Insert the Cassette.

≥Press [PUSH CLOSE] 2 to load the Cassette. ≥Close the outside compartment Cover.

4

CAMERA

VCR

CARD P.B.

	ON	M
FF		ODE
O

4 3

5, 6

6SEARCH 8	7
WEB CAMERA

CAMERA

VCR

CARD P.B.

9

FF	ON MODE
O

5

4Start recording. (l 24)

≥Turn the Palmcorder on. (l 17)

≥Rotate the Switch 3 to [ON]. (The [CAMERA] Lamp lights up.) ≥Press the 4 Button. (Recording starts.)

≥Press the 4 Button again to pause the recording.

To View the Playback Picture

5Switch to the VCR Mode, rewind the tape, and play the tape back. (l 36)

≥Set the 5 Switch to VCR mode. (The [VCR] Lamp lights up.) ≥Press the 6 Button. (Rewind the tape.)

≥Press the 7 Button. (Playback starts.) ≥Press the 8 Button. (Playback stops.)

6Turn the Palmcorder off. (l 17)

≥Set the 9 Switch to [OFF].

9