Panasonic PV-DV953 Setting Date and Time, Internal Lithium Battery Recharge, LP Mode

CLOCK SET

YEAR :2003

MONTH :OCT

DAY :20

HOUR : 8PM

MINUTE:46

PUSH MENU TO RETURN

1, 3	1, 2
	SHUTTER/IRIS/
	VOL/JOG	PUSH
M ENU

Setting Date and Time

1Press the [MENU] Button and rotate the [PUSH] Dial to select [OTHER FUNCTIONS] >> [CLOCK SET] >> [YES].

2Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/ [DAY]/[HOUR]/[MINUTE] and set it to a desired value.

≥Year will cycle in the order shown below. 2000 ) 2001 ) ... ) 2089 ) 2000 ) ...

3Press the [MENU] Button to finish setting the date and time.

≥The clock operation starts from [00] seconds.

≥The menu will disappear when the [MENU] Button is pressed again.

≥It is possible that the built-in clock in the Palmcorder may become inaccurate. Please check the time before recording. If the [0] Indication is flashing, charge the built-in lithium battery and reset the date and time.

1

1

CAMERA FUNCTIONS

1.CAMERA SETUP 2.ADVANCED FUNCTIONS 3.DIGITAL EFFECT 4.CARD SETUP 5.MULTI-PICTURES 6.RECORDING SETUP 7.DISPLAY SETUP 8.OTHER FUNCTIONS 9.DEMO MODE

PUSH MENU TO EXIT

1
RECORDING SETUP
REC SPEED	SP	LP
AUDIO REC	12bit
SCENEINDEX	2HOUR
WIND CUT	OFF
ZOOM MIC	ON
FLASH	ON
RED EYE REDUCTION OFF
FLASH LEVEL NORMAL
RETURN		---- YES
PUSH MENU TO EXIT
2

RECORDING SETUP

REC SPEED	SP
AUDIO REC	12bit	16bit
SCENEINDEX	2HOUR
WIND CUT	OFF
ZOOM MIC	ON
FLASH	ON
RED EYE REDUCTION OFF
FLASH LEVEL NORMAL
RETURN		---- YES

PUSH MENU TO EXIT

~~~~~~~~~~~~~~~~~~~~~~~~~

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation of the clock. When the [0] Indication 1 is lit, the internal lithium battery is almost or already discharged.

1Connect the AC Adaptor to the Palmcorder with the power turned off and then connect to the AC Jack.

≥After charging for 4 hours, the built-in lithium battery can power the clock for approximately 3 months.

~~~~~~~~~~~~~~~~~~~~~~~~~

LP Mode

A desired recording speed can be selected with [REC SPEED] on the [RECORDING SETUP] Sub-Menu. 1

If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode.

Although the image quality does not decrease with the LP Mode recording, mosaic-like noise patterns may appear on a playback image, or some normal functions may be restricted.

≥The contents that are recorded in LP Mode are not completely compatible with other equipment.

≥Audio Dubbing is not possible with LP Mode. (l41)

~~~~~~~~~~~~~~~~~~~~~~~~~

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO REC] on the [RECORDING SETUP] Sub-Menu. 2

High sound-quality recording is possible with “16bit 48kHz 2 track” Mode. With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on 2 tracks in stereo, while the other 2 tracks can be used for re-recording.

23