D-Link DWS-1008 CLI Manual 167
Examples: In the following example, an administrator establishes a Telnet session with another
switch and enters a command on the remote switch:
DWS-1008# telnet 10.10.10.90
Session 0 pty tty2.d Trying 10.10.10.90...
Connected to 10.10.10.90
Disconnect character is ‘^t’
Copyright (c) 2002, 2003 D-Link Systems, Inc.
Username: username
Password: password
DWS-1008-remote> show vlan
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
-----------------------------------------------------------------------------------------------------------
1 default Up Up 5
1 none Up
3 red Up Up 5
4 backbone Up Up 5
7 none Up
8 none Up
When the administrator presses Ctrl+t to end the Telnet connection, the management session
returns to the local DWS prompt:
DWS-1008-remote> Session 0 pty tty2.d terminated tt name tty2.d
DWS-1008#
See Also:
• clear sessions
• show sessions