D-Link dws-1008 manual Set radio-profile auto-tune power-interval, Name Radio profile name

set radio-profile auto-tune power-interval

Sets the interval at which RF Auto-Tuning decides whether to change the power level on radios in a radio profile. At the end of each interval, MSS processes the results of the RF scans performed during the previous interval, and changes radio power levels if needed.

Syntax: set radio-profile name auto-tune power-interval seconds

name Radio profile name.

seconds Number of seconds MSS waits before changing radio power levels to adjust to RF changes, if needed. You can specify from 1 to 65535 seconds.

Defaults: The default power tuning interval is 300 seconds.

Access: Enabled.

Usage: RF Auto-Tuning also can temporarily increase a radio’s power level to preserve the minimum data rate for an associated client. In this case, the radio reduces its power in 1 dBm increments until the power returns to the expected level.

Examples: The following command sets the power interval for radios in radio profile rp2 to 240 seconds:

DWS-1008# set radio-profile rp2 auto-tunepower-interval 240 success: change accepted.

See Also:

•set {ap dap} radio auto-tune max-power

•set radio-profile auto-tune channel-config

•set radio-profile auto-tune power-lockdown

•set radio-profile auto-tune power-ramp-interval

•show service profile

D-Link DWS-1008 CLI Manual 339