D-Link dws-1008 manual Set ap dap radio antennatype, Indoors, Outdoors, Ap port-list Dap dap-num

indoors	Specifies that the external antenna is installed inside the building.
outdoors	Specifies that the external antenna is installed outdoors.

Defaults: The default antenna location is indoors.

Access: Enabled

Examples: The following command sets the antenna location for radio 1 on Distributed AP 22 to outdoors:

DWS-1008# set dap 22 radio 1 antenna-location outdoors success: change accepted.

See Also:

• set {ap dap} radio antennatype

set {ap dap} radio antennatype

Sets the model number for an external antenna.

Syntax: set {ap port-list dap dap-num} radio {1 antennatype ANT1060 ANT1120 ANT1180 internal} {2 antennatype ANT5060 ANT5120 ANT5180 internal}

ap port-list

dap dap-num

radio 1

radio 2

radio 1 antennatype

radio 2 antennatype

List of ports connected to the DWL-8220AP access points on which to set the channel.

Number of a Distributed AP on which to set the channel.

Radio 1 of the DWL-8220AP.

Radio 2 of the DWL-8220AP.

802.11b/g external antenna models:

•ANT1060 - 60° 802.11b/g antenna

•ANT1120 - 120° 802.11b/g antenna

•ANT1180 - 180° 802.11b/g antenna

•internal - Uses the internal antenna instead

802.11a external antenna models:

•ANT5060 - 60° 802.11a antenna

•ANT5120 - 120° 802.11a antenna

•ANT5180 - 180° 802.11a antenna

•internal - Uses the internal antenna instead

D-Link DWS-1008 CLI Manual 326