D-Link dws-1008 manual Md5, Mkdir, Syntax md5 boot0 boot1filename, DWS-1008#md5 boot0MX040003.020

md5

Calculates the MD5 checksum for a file in the switch’s nonvolatile storage.

Syntax: md5 [boot0: boot1:]filename

boot0: boot1: Boot partition into which you copied the file.

filename: Name of the file.

Defaults: None.

Access: Enabled.

Usage: You must include the boot partition name in front of the filename. If you specify only the filename, the CLI displays a message stating that the file does not exist.

Examples: The following command calculates the checksum for image file MX040003.020 in boot partition 0:

DWS-1008#md5 boot0:MX040003.020

MD5 (boot0:MX040003.020) = b9cf7f527f74608e50c70e8fb896392a

See Also:

•copy

•dir

mkdir

Creates a new subdirectory in nonvolatile storage.

Syntax: mkdir [subdirname]

subdirname:Subdirectory name. Specify between 1 and 32 alphanumeric characters, with no spaces.

Defaults: None.

Access: Enabled.

Examples: The following commands create a subdirectory called corp2 and display the root directory to verify the result:

DWS-1008# mkdir corp2 success: change accepted.

D-Link DWS-1008 CLI Manual 296