D-Link dws-1008 - page 149

D-Link DWS-1008 CLI Manual 146

snmp-engine-id {ip ip-addr | Speciﬁes a unique identiﬁer for the SNMP engine.

local | hex hex-string} To send informs, you must specify the engine ID of the

inform receiver.

To send traps and to allow get and set operations and so on,

specify local as the engine ID.

• hex hex-string—ID is a hexadecimal string.

• ip ip-addr—ID is based on the IP address of the station

running the management application. Enter the IP address

of the station. MSS calculates the engine ID based on the

address.

• local—Uses the value computed from the switch’s system

IP address.

access {read-only | read-notify Speciﬁes the access level of the user:

| notify-only | read-write |

notify-read-write}

• read-only—An SNMP management application using the

string can get (read) object values on the switch but cannot

set (write) them.

• read-notify—An SNMP management application using the

string can get object values on the switch but cannot set

them. The switch can use the string to send notiﬁcations.

• notify-only—The switch can use the string to send

notiﬁcations.

• read-write—An SNMP management application using the

string can get and set object values on the switch.

• notify-read-write—An SNMP management application

using the string can get and set object values on the switch.

The switch can use the string to send notiﬁcations.